Activation: Step 2

Activation: Step 2


  1. Using your computer or mobile device, connect to your mifi or router's wireless network. If using a phone, you MUST first switch airplane mode on, then turn your wifi back on, and connect to the mifi, or routers wireless network. Please ignore all messages of "No Internet" - You do NOT have internet yet, you are setting that up now. 
  2. Open a browser and navigate to the mifi or router’s administration page located at: http://192.168.8.1
  3. Enter your administrator password, or create one if this is the first time logging in.
  4. Once the administration homepage loads, you’ll see a box labeled 3G/4G Modem, and should also contain the carrier name.
  5. Your screen should look like Figure 1 below.
  6. For quick setup, you can press the ‘auto-setup’ button, and within 3-5 minutes, the gray indicator dot next to the carrier name will turn green, and your mifi or router will be connected to the LTE network, and ready for use. See Figure 2 for a successful connection. 

Figure 1 (Auto-Setup Option) :

Figure 2 (Successful Connection) : 



    • Related Articles

    • LT18 Setup Step 1

      You should now have your sim card, and router. Please have them available as we'll now need some information from each.  From your sim card, please locate the 19 digit sim card number From your router, please locate your MAC Address (MAC) on the ...
    • LT18 Setup Step 2

      Now that your sim card is active, please follow this guide to continue the LT18 Setup. Standard LT18 Setup Steps In order for your equipment to be registered, you'll need to take a few simple steps to set up your router. First, connect to your ...
    • Activation: Step 1

      Submit Device & Sim Card Information Please visit: https://traveldata.page/account/activate/ to submit your information. Below is a list of the information we need, as well as where to locate the information.  Device Information you will need handy:  ...
    • Activation: Step 3

      0:00 Thanks for Activating Your Sim Card, Now We Need To Do Our Part In order for our support staff to complete your device configuration, please follow these steps. Please know, we cannot provide specific instructions, as your specific device ...
    • Manual Customer RemoteSim Setup

      Overview For customers not wishing to have Travel Data perform the setup of their router via InControl2, please follow this guide to configure your router. Use the details provided to you by our Activations Department. If you're not comfortable ...